HC-UPSRAP16I
6kW / 16.076kWh
6kW/16kWh all-in-one indoor residential battery ESS with integrated inverter, LCD display, and WiFi monitoring. Complete home energy solution in one unit.
Rated Power
6kW
Capacity
16.076kWh
Battery Type
LiFePO4
Protection
IP20 Indoor
All-in-One Design.
Complete Solution.
Ultimate Safety
LiFePO4 cells with multi-layer BMS protection for safe indoor operation — thermal management, overcurrent, and short-circuit safeguards.
Integrated All-in-One
Inverter + battery + BMS in a single indoor unit.
Long Cycle Life
≥6,000 cycles at 80% SOH for years of reliable residential energy storage.
Simple O&M
Minimal maintenance required with integrated diagnostics and remote monitoring capabilities.
Smart Energy Management
WiFi monitoring, LCD display, app control.
Surge Capacity
12kVA surge power for motor start and heavy loads.
Technical Specifications
| Rated Voltage | 208V / 220V / 230V / 240V; L+N+PE |
| Voltage Range | 90V ~ 280V ±3 (Normal Mode), 170V ~ 280V ±3 (UPS Mode) |
| Frequency | 50Hz / 60Hz (Auto Adaptive) |
| Rated Capacity | 6kW |
| Surge Power | 12kVA |
| Rated Voltage | 208V / 220V / 230V / 240V |
| Power Factor | 1 |
| Frequency | 50Hz / 60Hz ± 0.1% |
| Switch Time | 10ms |
| Overload Capacity (Battery Mode) | 60s @ 102%~110%, 10s @ 110%~130%, 3s @ 130%~150%, 0.2s @ >150% |
| Max. Efficiency (Battery Mode) | 93% @ 48VDC |
| Solar Charger Type | MPPT |
| Max. PV Input Current / Power | 27A / 9000W |
| Voltage Range | 80 ~ 520V |
| Max. PV Open Circuit Voltage | 500V |
| Max. PV Charge Current | 120A |
| Max. Grid Charge Current | 120A |
| Max. PV + Grid Charge Current | 120A |
| Battery Type | LiFePO4 |
| Battery Cell | 3.2V / 314Ah |
| Battery Pack Quantity | 1P16S |
| Nominal Battery Voltage | 51.2A |
| Rated Energy | 16.076kWh (0.5C, 25°C) |
| Max. Charge / Discharge Current | 150A |
| Voltage Range | 43.2 – 57.6V |
| Display | LCD |
| Monitoring | WiFi |
| Ingress Protection | IP20 |
| Operating Temperature | -15°C ~ 50°C |
| Relative Humidity | 5% ~ 95% (Non-condensing) |
| Storage Temperature | -15°C ~ 60°C |
| Max. Operating Altitude | 4000m (Derating above 1000m) |
| Product Size (D×W×H) | 400×420×750mm |
Planned Around Your Home
Energy Priorities.
Home PV Self-Consumption Planning
Review household load timing, PV generation, export arrangements and operating priorities when planning how stored solar energy should support the home.
Household Backup Planning
Define the priority household loads, required backup duration, transfer arrangement and installation conditions before confirming a backup configuration.
Time-of-Use Energy Planning
Review local tariff periods, household load patterns and the intended charge/discharge schedule as part of the project-specific energy plan.
Frequently asked questions
What is the HC-UPSRAP16I energy storage system?
HC-UPSRAP16I is listed as [All-in-One Residential Battery ESS]. The product page lists 6kW / 16.076kWh.
What power and capacity are listed for HC-UPSRAP16I?
The product page lists 6kW / 16.076kWh. Its displayed quick specifications are: Rated Power: 6kW; Capacity: 16.076kWh; Battery Type: LiFePO4; Protection: IP20 Indoor.
Which applications are listed for HC-UPSRAP16I?
The product page describes these project directions: Home PV Self-Consumption Planning; Household Backup Planning; and Time-of-Use Energy Planning. Final suitability should be reviewed against household load, PV interface, installation conditions and applicable project requirements.
What should be reviewed when scoping HC-UPSRAP16I?
Review the required power, energy duration, electrical interface, installation location, operating objectives, and applicable project requirements when scoping the final configuration.
Interested in the HC-UPSRAP16I?
Share your household load profile, PV arrangement, backup priorities and installation conditions. Our team can review a residential storage configuration for your project.