HC-UPSSP1205
500kW / 1205.76kWh
Maximum-capacity distributed BESS cabinet delivering 500kW / 1.2MWh. CCS modular architecture with the highest compatibility across grid codes.
Rated Power
500kW
Capacity
1205.76kWh
Battery Type
LiFePO4
Cooling
Air Cooling
Maximum Capacity.
Distributed Control.
Safe & Reliable
LiFePO4 cells with multi-layer protection: thermal warning algorithms, fire suppression, and explosive venting.
CCS Module Design
Standardized cell-to-system modular architecture for rapid deployment and flexible capacity configuration.
High Compatibility
Compatible across multiple grid codes and regional standards — deploy globally with minimal reconfiguration.
User-Friendly
Intuitive monitoring interface, OTA firmware updates, and remote diagnostics via cloud-based EMS platform.
Distributed Architecture
Multiple cabinets coordinate as a unified system for scalable capacity.
Fast Response
Millisecond-level response for peak shaving, demand response, and grid frequency support applications.
Technical Specifications
| Rated Power | 500kW |
| Maximum Current | 794A |
| Rated Voltage | 400V |
| Wiring Method | 3P4L+PE |
| Frequency | 50Hz / 60Hz |
| Power Factor | 1 (Leading) ~ 1 (Lagging) |
| THDi | <2% (Rated Power) |
| Rated Power | 500kW |
| Rated Voltage | 400V |
| Maximum Current | 794A |
| Wiring Method | 3P4L+PE |
| Frequency | 50Hz / 60Hz |
| THDu | <3% (Linear Load) |
| Battery Type | LiFePO4 |
| Battery Cell | 3.2V / 314Ah |
| Battery Pack Configuration | 1P16S |
| Battery Pack Quantity | 15 Packs / Cluster |
| Battery Cluster Quantity | 5 Clusters |
| Rated Current | 140A × 5 |
| Voltage Range | 648 – 864V |
| Rated Capacity | 1205.76kWh |
| Maximum PV Input Voltage | 1000V |
| Maximum PV Power | 720kW |
| Number of MPPT Modules | 12 |
| MPPT Voltage Range | 250 – 850V |
| MPPT Full-Load Voltage Range | 450 – 850V |
| Weight | <14T |
| Dimensions (W×D×H) | 1212×1104×2321mm × 5 + 1850×1100×2330mm |
| Maximum Efficiency | ≥85% |
| Air Conditioning Power | 2kW (Cooling), 2.5kW (Heating) × 5 |
| Temperature | -20°C ~ 50°C (De-Rating Over 45°C) |
| Humidity | 5% ~ 95%RH (Non-Condensation) |
| Protection Level | IP54 |
| Anti-corrosion Rating | C4 |
| Cooling Method | Air Cooling |
| Noise | ≤75dB |
| Altitude | 2000m (>2000m Derating) |
| Display | HMI |
| Fire Protection | Aerosol |
| Communication | Ethernet |
| Certification | CE, UN38.3 |
| Charge/Discharge Rate | 0.5CP |
| Depth of Discharge | 90% |
| Cycle Life | ≥6000 Cycles (80% SOH @ Standard) |
Built for C&I
Distributed Storage.
C&I Peak Shaving
Reduce peak demand charges by 30–50% through intelligent charge/discharge scheduling aligned with tariff periods.
Demand Response
Participate in utility demand response programs with fast-reacting distributed storage for revenue generation.
Grid Support
Provide frequency regulation, voltage support, and spinning reserve services to stabilize local grid infrastructure.
Explore Other Split Cabinet Systems
Frequently asked questions
What is the HC-UPSSP1205 energy storage system?
HC-UPSSP1205 is listed as [Air Cooling Distributed Cabinet BESS]. The product page lists 500kW / 1205.76kWh.
What power and capacity are listed for HC-UPSSP1205?
The product page lists 500kW / 1205.76kWh. Its displayed quick specifications are: Rated Power: 500kW; Capacity: 1205.76kWh; Battery Type: LiFePO4; Cooling: Air Cooling.
Which applications are listed for HC-UPSSP1205?
The product page lists these application scenarios: C&I Peak Shaving; Demand Response; Grid Support. The final use case should be reviewed against the site's operating requirements.
What should be reviewed when scoping HC-UPSSP1205?
Review the required power, energy duration, electrical interface, installation location, operating objectives, and applicable project requirements when scoping the final configuration.
Interested in the HC-UPSSP1205?
Share your site requirements and our engineering team will provide a detailed system configuration and commercial proposal.